EasyManua.ls Logo

Blaupunkt Orlando MP46 - Speaker Balance Adjustment; Speaker Fader Adjustment; Preamplifier Output and Subwoofer Settings; Adjusting the Sub-Out Level

Blaupunkt Orlando MP46
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
69
ENGLISH
Press the or button : repeatedly
until the desired centre frequency ap-
pears on the display.
Press the
or button : to adjust
the level between ±7.
Press the AUDIO button 5 twice to
exit the menu.
Setting the left/right volume
distribution (balance)
To adjust the left/right volume distribution
(balance),
press the AUDIO button 5.
"BASS" appears on the display.
Press the
or button : repeatedly
until "BAL" appears on the display with
the current setting.
Press the
or button : to adjust
the balance (right/left).
Press the AUDIO button 5 to exit the
menu.
Adjusting the front/rear volume
distribution (fader)
To adjust the front/rear volume distribution
(fader),
press the AUDIO button 5.
"BASS" appears on the display.
Press the
or button : repeatedly
until "Fader" appears on the display
with the current setting.
Press the
or button : to adjust
the volume distribution front/rear.
Press the AUDIO button 5 to exit the
menu.
Preamplifi er output
(Preamp-Out/Sub-Out)
You can use the preamplifi er outputs
(Preamp-Out) of the car sound system to
connect external amplifi ers. In addition,
you can connect an amplifi er for operating
a subwoofer to the integrated dynamic low-
pass fi lter of the device (level and cut-off
frequency can be adjusted).
For this purpose, the amplifi ers must be
connected as described in the installation
instructions.
Adjusting the sub-out level
The sub-out level can be adjusted in 8 incre-
ments (0 to +7).
Press the AUDIO button 5.
"BASS" appears on the display.
Press the
or button : repeat-
edly until "SUBOUT" appears on the
display.
Press the
or button : to adjust a
value between 0 and +7.
When you have fi nished making your chang-
es,
press the AUDIO button 5 twice.
Adjusting the sub-out cut-off
frequency
You can select 1 of 4 settings: 0 Hz, 80 Hz,
120 Hz and 160 Hz.
Press the AUDIO button 5.
"BASS" appears on the display.
Sound Preamplifi er output
02OrlandoMP46_gb.indd 6902OrlandoMP46_gb.indd 69 01.03.2006 15:46:02 Uhr01.03.2006 15:46:02 Uhr

Table of Contents

Related product manuals