54
The selected programme type appears
briefl y on the display.
Press the
or button : to start
seek tuning.
The radio will then tune into the next station
that it fi nds that corresponds to your select-
ed programme type.
Assigning a programme type to a station
button
Select a programme type using the
or
button :.
Press and hold the desired station but-
ton 1 - 6 ; for longer than two sec-
onds.
The programme type is stored on the se-
lected button 1 - 6 ;.
Optimising radio reception
Treble reduction feature during
interference (High Cut)
The High Cut function results in an improved
reception in case of weak radio reception
(FM only). If reception interferences are
present, the interference level is automati-
cally reduced.
Switching High Cut on/off
Press the MENU button 9.
Press the
or button : repeat-
edly until "TUNER MENU" appears on
the display.
Press the
button : to open the
menu.
쏅
쏅
쏅
쏅
쏅
쏅
Press the or button : repeatedly
until "HICUT" appears on the display.
Press the
or button : to switch
High Cut on or off.
"HICUT OFF" means no automatic reduc-
tion of the interference level, "HICUT ON"
means automatic reduction of the interfer-
ence level.
When you have fi nished making your chang-
es,
press the MENU button 9.
Confi guring the display
In radio mode, you can enlarge the time
shown on the display.
Press and hold down the DISPL
button 8 for longer than two seconds
to switch the display.
After approx. two seconds, the device
switches back to the previous display.
쏅
쏅
쏅
쏅
Radio mode
02OrlandoMP46_gb.indd 5402OrlandoMP46_gb.indd 54 01.03.2006 15:45:55 Uhr01.03.2006 15:45:55 Uhr
To Next Page
Loading...
Need help?
General
