75
ENGLISH
Note:
If the AUX input is switched on, you can
select it by pressing the SOURCE but-
ton 4.
Adjusting the AUX
preamplifi cation
To be able to adjust for differences in vol-
ume, the level adjustment of the AUX input
can be adjusted in 4 increments (0 to 3).
Press the MENU button 9.
Press the
or button : repeat-
edly until "AUX MENU" appears on the
display.
Press the
button : to open the
menu.
Press the
or button : repeatedly
until "AUX LVL" appears on the display.
Press the
button : to open the
menu.
Press the
or button : to adjust
the level adjustment.
When you have fi nished making your chang-
es,
press the MENU button 9 three
times.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
TMC for dynamic navigation
systems
TMC is the abbreviation for Traffi c Message
Channel. Traffi c announcements are broad-
cast digitally via TMC, which means they can
be used by compatible navigation systems
during route planning. Your car sound sys-
tem has a TMC output, which you can use
for connecting Blaupunkt navigation sys-
tems. You can fi nd out from your Blaupunkt
dealer which navigation systems can be
used with your car sound system.
If a navigation system is connected and a
TMC station is being received, the display
shows TMC.
If dynamic navigation is active, the system
will tune into a TMC station automatically.
External audio sources TMC
02OrlandoMP46_gb.indd 7502OrlandoMP46_gb.indd 75 01.03.2006 15:46:06 Uhr01.03.2006 15:46:06 Uhr
To Next Page
Loading...
