Blodgett CTB SERIES Installation Operation & Maintenance

Installation
5
Oven Assembly
NSF BOLTS
These bolts are required by NSF to block any exĆ
posed hole on the back of an oven. This includes:
D any unit, single or stacked, without a back panel.
D any holes in stacked units not used for mountĆ
ing stacking brackets.
1. Locate the 5/16" bolts that were shipped with
the oven.
2. Install the bolts as shown in Figure 3.
Double Stacked Units Units without back panels
Figure 3
All manuals and user guides at all-guides.com

Blodgett CTB SERIES Specifications

General

Brand	Blodgett
Model	CTB SERIES
Category	Convection Oven
Language	English