Blue Box - 18
NOISE-RELATED HAZARDS
ELECTRICAL HAZARDS
THERMAL HAZARDS
HAZARDS PRODUCED BY SUBSTANCES
FURTHER HAZARDS
Operating mode Analysed risk or hazard Solution adopted
Normal operating regime
Burns caused by high
temperatures.
Most of the pipes that could cause burns are
lagged with thermo insulating material.
If the unit is positioned in locations easily
accessible by non qualified people provide
suitable protection.
Maintenance
Burns caused by high
temperatures.
Most of the pipes that could cause burns are
lagged with thermo insulating material.
If the unit is positioned in locations easily
accessible by non qualified people provide
suitable protection.
Operating mode Analysed risk or hazard Solution adopted
Operating regime
Maintenance
Contact with live electrically
components (direct contact).
Operating regime
Maintenance
Elements carrying electrical
current in the case of faults.
Operating regime
Maintenance
Inappropriate insulation.
Operating regime
Maintenance
Radiated heat due to short-
circuits or overloads.
The units are designed and built in
compliance with harmonised standard EN
60204-1.
Operating mode Analysed risk or hazard Solution adopted
Normal operating regime
Maintenance
contained in the unit See safety sheets of refrigerants R407C and
R22
o eliminate any further hazard it is necessary to provide adequate protection to avoid access to the unit by non
qualified people.
Operating mode Analysed risk or hazard Solution adopted
Normal operating regime
Maintenance
Hearing damage. All units are designed and manufactured
with to reduce noise emissions to the
minimum.
To Next Page
Loading...
