EasyManua.ls Logo

Blue Clean 1120 - User Manual

Blue Clean 1120
72 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
cod. 96161 Rev00_18112021 - LJ
EN
High pressure washer
Original instructions
IT
Idropulitrice alta pressione
Istruzioni originali
DE
Hochdruckreiniger
Übersetzung der Originalanleitung
ES
Hidrolimpiadora de alta presión
Traducción de las instrucciones originales
FR
Nettoyeur haute pression
Traduction des instructions originales
PT
Lavadora a alta pressão
Tradução das instruções originais
1120

Table of Contents

Questions and Answers

  • A
    allentaylorAug 16, 2025
    What to do if Blue Clean 1120 pump does not reach working pressure?
    • X
      xdixonAug 16, 2025
      If your Blue Clean Pressure Washer pump isn't reaching working pressure, several factors could be the cause. First, the nozzle might be worn and need replacement. Second, the water filter could be fouled, requiring cleaning. Third, the water supply might be insufficient, so ensure the supply tap is fully open. Fourth, air might be getting sucked into the system; check the tightness of hose fittings. Fifth, there might be air in the pump; switch off the appliance and repeatedly depress and release the gun trigger until the water flows steadily, then switch the appliance back on. Sixth, the adjustable nozzle may not be correctly positioned; set it to the (+) setting. Finally, if water is being drawn from an open container at a height exceeding 0.5 m, reduce the suction height.
  • R
    Ryan KochAug 19, 2025
    Why does my Blue Clean 1120 motor buzz but fail to start?
    • B
      Becky RojasAug 19, 2025
      If your Blue Clean Pressure Washer motor buzzes but doesn't start, it could be due to several reasons. The power supply voltage might be too low; ensure the mains power supply voltage matches what's indicated on the appliance's plate. Alternatively, a voltage drop might occur due to the use of an extension cable; check the characteristics of the extension cable.
  • D
    Dawn HarrisAug 22, 2025
    What to do if Blue Clean 1120 Pressure Washer pump pressure drops suddenly during use?
    • C
      Crystal OrozcoAug 22, 2025
      If the pump pressure of your Blue Clean Pressure Washer drops suddenly during use, it could be due to several reasons. If water is being drawn from an external tank, connect the appliance to the mains water supply. If the inlet water is too hot, reduce the temperature. Also, the nozzle or the inlet filter might be clogged or fouled, requiring cleaning.
  • V
    Valerie BeanAug 25, 2025
    What to do if Blue Clean Pressure Washer motor fails to start?
    • T
      Todd HarveyAug 26, 2025
      If your Blue Clean Pressure Washer motor fails to start, first check that the plug is firmly in the socket and that the mains voltage supply is present.
  • Y
    Yesenia HansonAug 28, 2025
    What to do if Blue Clean 1120 is noisy?
    • P
      Paige DouglasAug 28, 2025
      If your Blue Clean Pressure Washer is making excessive noise, the water might be too hot. Try reducing the water temperature.
  • M
    mstewartAug 31, 2025
    What to do if Blue Clean 1120 Pressure Washer shuts off and will not restart?
    • J
      John MaldonadoAug 31, 2025
      If your Blue Clean Pressure Washer shuts off and won't restart, the magneto-thermic switch may have tripped. Try resetting it.
  • D
    Derrick NormanSep 3, 2025
    Why Blue Clean Pressure Washer has no detergent sucked in?
    • L
      Linda TorresSep 3, 2025
      If your Blue Clean Pressure Washer isn't sucking in detergent, there are several potential causes. The adjustable nozzle might be on a high-pressure setting; set it to the " " setting. The detergent might be too dense; try diluting it with water. A high-pressure hose extension might be in use; fit the original hose.
  • C
    Christopher RussellSep 6, 2025
    What to do if Blue Clean Pressure Washer delivers no water when gun trigger is depressed?
    • P
      Peter BeanSep 6, 2025
      If there is no water delivery when the gun trigger is depressed on your Blue Clean Pressure Washer, the nozzle might be clogged. Clean the nozzle.
  • N
    Natalie VasquezSep 9, 2025
    What does it mean if the fault indicator lamp flashes 4 times intermittently on Blue Clean 1120 Pressure Washer?
    • B
      Bonnie BeardSep 9, 2025
      If the fault indicator lamp on your Blue Clean Pressure Washer flashes 4 times intermittently, it indicates a machine safety stop after one hour of non-use. Turn off the machine at the switch to restore correct operation.
  • T
    Tyler CochranSep 12, 2025
    What does it mean if the fault indicator lamp flashes 3 times intermittently on Blue Clean 1120 Pressure Washer?
    • N
      Nicole KellerSep 12, 2025
      If the fault indicator lamp on your Blue Clean Pressure Washer flashes 3 times intermittently, it indicates an insufficient water supply. Fully open the supply tap.

Summary

1 SAFETY INSTRUCTIONS

2 SAFETY SIGNS

Instructions provided by safety signs and symbols fitted to appliance and manual.

3 SAFETY RULES;RESIDUAL RISKS

3.1 SAFETY “DO NOTS”

Critical warnings and prohibitions for safe operation of the appliance.

3.2 SAFETY “MUSTS”

Essential requirements and actions for safe operation and maintenance.

4 GENERAL INFORMATION

4.1 Use of the manual

Guidance on how to read and use the appliance manual for reference.

4.2 Delivery

Information on how the appliance is packaged and delivered.

4.3 Disposing of packaging

Instructions for environmentally responsible disposal of packaging materials.

5 TECHNICAL INFORMATION

5.1 Envisaged use

Describes the appliance's design for individual cleaning of vehicles, machines, and masonry.

5.2 Operator

Identifies the intended operator of the appliance via a symbol.

5.3 Main components

Lists and identifies the primary parts of the high pressure washer.

5.4 Safety devices

Details the safety features like starter device and water jet control lever.

6 INSTALLATION

6.1 Assembly

Instructions for installing and assembling the appliance safely.

6.2 Fitting the rotating nozzle

Guide on installing the rotating nozzle kit for enhanced washing power.

6.3 Electrical connection

Ensuring safe and correct electrical hook-up for the appliance.

6.4 Water supply connection

Procedures for connecting the appliance to the water source.

7 ADJUSTMENTS

7.1 Adjusting the detergent

Procedure for setting the nozzle to deliver detergent at the correct pressure.

7.2 Adjusting the working pressure

Using the regulator and pressure gauge to set the working pressure.

8 INFORMATION ON USE OF THE APPLIANCE

8.1 Controls

Identification and function of the appliance's main controls.

8.2 Start-up

Step-by-step instructions for safely starting the appliance.

8.3 Stopping

Procedure for safely shutting down and stopping the appliance.

8.4 Restarting

Steps to safely restart the appliance after it has been stopped.

8.5 Storage

Instructions for proper storage of the appliance, including draining.

8.6 Refilling and using detergent

Guidance on refilling the detergent tank and using it with the appliance.

8.7 Recommended cleaning procedure

Best practices for effective cleaning without damaging surfaces.

8.8 Warning and working lights

Information on warning lights indicating operation status and faults.

9 ROUTINE MAINTENANCE

9.1 Inspect the power cable, high pressure hose, fittings, trigger gun and lance at each use.

Essential checks before each use to ensure safety and performance.

9.2 Cleaning the nozzle

Instructions for cleaning the nozzle to maintain optimal water flow.

9.3 Cleaning the filter

How to clean the inlet and detergent filters for proper operation.

9.4 Oil level

Procedure for checking and topping up the pump oil level.

9.5 End-of-season storage

Steps for preparing the appliance for winter storage to prevent damage.

10 EXTRAORDINARY MAINTENANCE

11 STORAGE AND TRANSPORTATION

12 TROUBLESHOOTING

13 HOW TO AVOID DAMAGING SURFACES

EC Declaration of Conformity

WARRANTY

Technical Data

Blue Clean 1120 Specifications

General IconGeneral
Weight27 lbs
Hose Length5 m
Max Pressure120 bar
Maximum Pressure120 bar
Power SourceElectric
Nozzle Types0°, 25°

Related product manuals