Blue Wave SAVANNAH - Final Assembly Checks and Component Installation; Checking All Connections and Joints; Installing Skimmer and Filtration System

23
CHECKING ALL CONNECTIONS AND JOINTS
• Once completed, check all connections and tighten loose screws and bolts, but do not over tighten.
• See diagram 35 for identication of pool components.
(Diagram 35)
INSTALLING THE SKIMMER
• For protection and safety, all edges of the skimmer and return tting windows must be covered by
vinyl tape or rust proong paint.
• Follow the skimmer manufacturer’s instructions for skimmer installation.
INSTALLATION OF THE FILTRATION SYSTEM
ATTENTION: FOLLOW ALL SAFETY WARNINGS INCLUDED IN FILTRATION SYSTEM
INSTALLATION MANUAL.
• Follow the manufacturer’s instructions for installation of the ltration system. Once all of the hoses
are attached to the skimmer and return tting, nish lling the pool.