App Settings
© BlueFire LLC ↑ Go to the top Version 3.3 | Page 23
Reset ECM Data: This will reset ECM data used for trip data and for calculating average
fuel economy, fuel remaining, and distance remaining when not connected to the adapter.
Use this option if your new trip data or your fuel economy data is not correct. No harm will
be done, you'll just not see this data when not connected to the adapter.
Reset Hidden Alerts: This will cause all the hidden alerts (alerts with the 'Got It' button)
to be displayed again. This is helpful if you accidently tapped the 'Got It' button on an alert
that contains instructional information and you want to see it again (for example, the alert
you see when first showing a custom dash).
Reset App: This will reset the App to its initial factory settings. Please note that resetting
the app will delete all Settings, Custom Dashes, Saved Trips and Logging Files.
Reset Adapter: This will reset the adapter to its initial factory settings. If you are having
trouble connecting to the adapter, resetting it may help. You must be connected to the
adapter before performing a reset. The App will automatically disconnect from the adapter.
After the adapter resets (approximately 30 seconds), the LEDs will be blinking red, green
and blue. You must then unplug and re-plug in the adapter to complete the reset.
System: These are advanced system settings. Please use with caution. You most likely will
have no need of these.
To Next Page
Loading...