App Settings
© BlueFire LLC ↑ Go to the top Version 3.3 | Page 22
an engine is replaced. This allows to adjust by the difference. (See example in Odometer
offset).
Outside Temperature Offset: If you need to adjust the outside temperature because the
sensor is off, you can input a positive or negative number to help obtain a more accurate
reading.
Adapter Security: Allows you to change the security settings - Secure with Device Id;
Secure with Adapter Id, and Secure with User Name and Password. Secure with Device Id
will only allow your mobile device to connect to the adapter. Secure with Adapter Id will
allow any mobile device that has previously connected to your adapter to connect to the
adapter. Secure with User Name and Password will allow any mobile devices with the same
User Name and Password to connect to the adapter. You can use the security settings to
ensure no one near you accidently (or on purpose) connects to your adapter. Note, the
settings can only be changed after connecting to the adapter.
Font Size: This refers to the font size of all text in the App. The options are small,
medium, large, and extra-large. You will need to restart the App for this change to take
effect.
Adjust Font Size: This allows for a more specific font size adjustment. The value is in
pixels and must be between -10 and +20. You will need to restart the App for this change
to take effect.
Language: Changes your language from English (default) to one of three others (French,
Spanish, and Portuguese). Note, the App languages are not fully completed. You will need
to restart the App for this change to take effect.
Home Time Zone: Your home time zone (where you live).
Email Address: Enter the email address you would like the App to send trips, logging, and
fault information to you. Email address is required and the App will continue to remind you
to enter it.
Custom Dash: This will show the Customize Dash page which allows you to design your
custom dash using Graphic and text gauges. See the Customize your Dash section for more
detail.
Send the Event Log: This will email the App's Event Log to BlueFire Support. Do this only
if requested by BlueFire support. This is used by BlueFire Support to help trouble shoot a
problem.
Clear the Event Log: This will clear the App's Event Log. As the Event Log is
automatically cleared every two weeks and it does not consume very much storage, you
should not need to do this but in the event your mobile device's storage is filling up, you
can try this to see if it helps.
To Next Page
Loading...