To Next PageTo Next PageHow to calibrate Bluelab Measuring Instruments conductivity pen when it gives high readings?
If your Bluelab conductivity pen is giving high readings, calibrate the pen using a known standard solution. Refer to section 4.0 to ensure you are using the correct solution for your selected conductivity unit.
What to do if Bluelab Measuring Instruments conductivity pen gives low readings?
If your Bluelab conductivity pen is showing low readings, it may be due to a contaminated probe. Clean the probe and retest it in a known solution. Be sure to use an unscented cleaner such as Bluelab Conductivity Probe Cleaner, Jif, Liquid Vim, Soft Scrub, Cif cream, or Viss.
What to do if the screen of Bluelab Measuring Instruments does not turn on?
If the screen on your Bluelab Measuring Instruments unit does not turn on, replace the unit.
General| Brand | bluelab |
|---|---|
| Model | conductivity pen |
| Category | Measuring Instruments |
| Language | English |
Lists measurements, units, display, calibration, and operational functions.
Illustrates button functions, indicators, and shroud.
Emphasizes probe cleanliness for accurate conductivity readings.
Covers powering on/off, measuring, holding readings, and changing units.
Instructions for rinsing the probe after each use.
Detailed steps for removing the shroud and cleaning the probe face.
Guide to replacing the AAA battery and ensuring waterproof seal integrity.
Steps for calibrating the unit with standard solutions and verifying success.
Explains common error codes for temperature and range issues.
Solutions for low/high readings and power-on failures.
Outlines measurement range, resolution, accuracy, and operating conditions.
Explains EC and ppm scales, differences, and conversion methods.
Details the contents of the conductivity probe care kit.
Covers warranty duration, coverage, exclusions, service, and limitations of liability.
Information on the product's guarantee period and proof of purchase.
Provides support contact details and links to online resources.
