Features
Measures conductivity and temperature Hold reading function
Selectable units for conductivity and
temperature
Low battery indicator
Backlit LCD display Fully waterproof
Calibration optional Auto off function
Successful calibration indicator Automatic temperature compensation (ATC)
Power button / hold
Short press to turn on.
Short press to hold reading.
Long press to turn off.
Calibrate button
See calibration section.
Units button
Hold until units ash then short press to
change units.
Screen will change back when no buttons
have been pressed for 3 seconds.
Quick guide
Low battery warning
Appears when
batteries are low.
Check mark/
tick to indicate
successful
calibration.
ATTENTION: The instrument is only as
accurate as the probe is clean
Shroud
The conductivity probe must be cleaned regularly to remove built up nutrient salts to
ensure an accurate reading (see cleaning instructions in section 2.0).
English
2
To Next Page
Loading...
Need help?
General
