10
MAINTENANCE
Daily maintenance
To clean Cleone
Do not use chemicals to clean the surface. Alcohol, petrol, organic
and inorganic acids, strong basic chemicals (such as concentrated
dishwashing detergent) will cause damage to the surface.
Do not use hard, sharp, or abrasive tools to clean Cleone.
Step Action
1 Clean the outer surface with a soft, moist cloth and a weak soap solution to remove dust,
stains, and dirt.
2 Dry with a soft dry cloth.
Regular maintenance
Regular maintenance is important for correct function and
long term operation. We recommend only Bluewater approved
service personnel perform maintenance and repairs.
The inlet water quality controls the maintenance frequency. If the inlet supply water
contains high levels of dissolved solids, do maintenance more frequently.
For instructions on how to do maintenance, see Complete User manual on www.
bluewatergroup.com.
Frequency Description
6 months *Replace the coarse, 20 micron sediment prefilter (CL-20).
*Replace the fine, 5 micron sediment prefilter (CL-5).
*Replace the activated carbon prefilter (CL-C).
*Replace the integrated mineral filter.
Do an inlet supply water pressure and quality check.
1 year *Replace the activated carbon postfilter (CL-Inline-C).
Replace the UV lamp.
3-5 years *Replace the reverse osmosis membrane.
*NOTE: Each time a
filter is replaced
Flush new filters before using. See flushing procedures in Complete User
Manual.
To Next Page
Loading...
