07
System operation indicator
Figure 3. System operation indicator
Pos Description
1. Light ON On – Cleone operates correctly.
2. Light OFF
O – Cleone is shut o. If power switch is in position “1”, see “Troubleshooting.”
Flashes – There is a problem with Cleone. See “Troubleshooting” or contact
your Bluewater dealer.
3. Light Flashes There is a problem with Cleone. See “Troubleshooting,” or contact your Bluewater
dealer.
Cleone inside
Figure 4. Cleone inside
Pos Description Pos Description
1 Coarse, 20 micron
sediment prefilter (CL-20)
5 Activated carbon postfilter
(CL-Inline-C) (Classic, Balance, Ultra)
UV lamp (PurityPlus)
2
Fine, 5 micron sediment
prefilter (CL-5)
6 UV lamp (Ultra)
Integrated mineral filter (Balance, PurityPlus)
The position is left empty for Classic
3 Activated carbon prefilter
(CL-C)
7 Leak protection system switch
4 Reverse osmosis membrane
12 3
1
7
23456