Bluewater CLEONE - Cleone Inside

06
Complete User manual
System operation indicator
Figure 3.
12 3
System operation indicator
Pos Description
1 On – Cleone operates correctly.
2 Off – Cleone is shut off. If power switch is in position “1” see “Troubleshooting” on page 29.
3 Flashes – There is a problem with Cleone. See “Troubleshooting” on page 29 or contact your Bluewater dealer.
Cleone inside
Figure 4.
1
7
23456
Cleone inside
Pos Description Pos Description
1 Coarse sediment prefilter (CL-20) 5 Activated carbon postfilter
(CL-Inline-C)
(Classic, Balance, Ultra)
UV lamp (PurityPlus)
2 Fine sediment prefilter (CL-5) 6 UV lamp (Ultra)
Integrated mineral filter
(Balance, PurityPlus)
The position is left empty for Classic.
3 Activated carbon prefilter (CL-C) 7 Leak protection system switch
4 Reverse osmosis membrane