V3A | 08/2018
30
© by Blum-Novotest
Setup radio system
5. Setup radio system
In order that a radio measuring system can work together with the IF59-A2, it must be
assigned to an operating mode in which it can be activated. This process is called "pair-
ing".
Up to 6 radio measuring systems type TC/Z can be paired on the interface and ad-
dressed via the inputs TC, DUO, BG and TWIN.
Up to 3 radio measuring systems type RG/DIGILOG can be paired on the interface and
addressed via the inputs TC, DUO, BG and TWIN.
NOTICE
Risk of collision due to lack of pairing possible.
Execute probe pairing after an exchange of the system or after a repair by Blum-
Novotest.
There are two methods of probe pairing.
• Pairing procedure via SET-key (manual pairing)
• Pairing procedure via M-function (automatic pairing)
To Next Page
Loading...
Need help?
General