V3A | 08/2018
35
© by Blum-Novotest
Setup radio system
5.2 Pairing procedure via M-function (automatic pairing)
IF59-A2, DIP switch 2:
Touch probe: Standby-Mode
IF59-A2: Standby-Mode
RC66:connected with IF59-A2
Input AUX (X1-14) must be wired with another machine output.
Input AUX is switchable.
Operating mode is switchable (TC / DUO / BG / TWIN)
Start signal is not firmly connected.
Magnetic pin
Probe Z-Nano cannot be operated via the AUX-input as the AUX-input is used
for pairing.
1
2
3
4
ON
To Next Page
Loading...