35
J
Service and maintenance
J1
J2
J3
Maintenance
1. Maintenance
• During all maintenance operations,
disconnect the machine from it’s
electrical source (unplugged).
Re-connect only for testing.
• Regularly remove drilling dust from
the machine.
• Before every use of the machine,
check the air filter unit (J1) for water
which may accumulate in the filter
unit. Empty the unit if necessary.
• Before every use of the machine,
check the pneumatic lines and
electrical lines for damage.
• The guide elements (J2) must be
cleaned regularly with a dry cloth to
remove dust. (Do not use cleaners
or solvents)
%$0,1,35(66)$,G1US $0
To Next Page
Loading...
