10
D
Initial set-up of MINIPRESS
H
B
T
L
L
L
L
D1
Unpacking and assembly
1. MINIPRESS footprint
H = 27-15/16"
B=24"
T = 29-15/16"
2. Unpack MINIPRESS and fasten it
to a suitable table using bolts.
• Open the box.
• Get an assistant to help you lift
MINIPRESS onto the worktable.
Warning:
The machine weights
approx. 82 lbs (37 kg) so
make sure that the table is
sturdy enough!
• Fit M8 bolts through the drill holes
(D1) and tighten them.
• Do not install MINIPRESS in a damp
area but in a dry room.
%$0,1,35(66)$,G1US $0
To Next Page
Loading...
