Need help?Do you have a question about the Blusafe Breeze and is the answer not in the manual?
Lists all components included in the Model A smart handle package.
Instructions on how to orient the Model A handle for correct door opening direction.
Detailed step-by-step guide for physically installing the Model A smart handle.
Lists all components included in the Model B smart handle package.
Instructions on how to orient the Model B handle for correct door opening direction.
Detailed step-by-step guide for physically installing the Model B smart handle.
Lists all components included in the Model C smart handle package.
Instructions on how to orient the Model C handle for correct door opening direction.
Detailed step-by-step guide for physically installing the Model C smart handle.
Covers important notes, low battery indicators, and battery replacement procedures.
Step-by-step guide for registering ADMIN fingerprints and initial setup.
Guide for registering USER fingerprints and unlocking the handle.
Guidance on using emergency power, key unlock, and deleting all fingerprints.
A summary of technical details including power, battery life, and ratings.
The Blusafe Breeze Smart Handle is an innovative door handle designed to provide secure and convenient access through fingerprint recognition. This smart handle integrates advanced biometric technology into a traditional door handle form factor, offering a modern security solution for homes and offices. The device is available in three distinct models—Model A, Model B, and Model C—each tailored to different door configurations and aesthetic preferences, ensuring compatibility with a wide range of existing door setups.
The primary function of the Blusafe Breeze Smart Handle is to allow users to unlock a door using their unique fingerprint. This eliminates the need for physical keys, keycards, or memorizing passcodes, streamlining the entry process and enhancing security. The handle is equipped with a fingerprint sensor located on the external handle, which quickly reads and verifies a user's fingerprint to grant access. When a registered fingerprint is detected, the internal mechanism of the handle turns, allowing the handle to be pushed down to operate the latch and open the door.
Beyond its core fingerprint access, the Blusafe Breeze Smart Handle incorporates several usage features designed for convenience and reliability. For instances where biometric access might not be feasible, such as during a power outage or system lockdown, the handle includes a traditional mechanical key override. Each handle comes with two mechanical keys, providing a reliable backup entry method. Additionally, the handle supports an emergency power supply feature. If the internal batteries run out, users can connect a mobile power bank or a USB mains device via a Micro-USB port located next to the fingerprint sensor on the external handle, temporarily powering the handle for access. This ensures that users are never locked out due to battery depletion.
The smart handle's setup process is user-friendly, starting with the registration of ADMIN fingerprints. The first three fingerprints registered are designated as ADMIN fingerprints, which are crucial for authorizing the addition of new user fingerprints or for deleting all existing fingerprint data during a reset. This hierarchical access control ensures that only trusted users can manage the handle's biometric database. After ADMIN fingerprints are set up, up to 47 additional USER fingerprints can be registered, allowing multiple individuals to have access. The registration process involves briefly placing a finger on the sensor multiple times in different positions to ensure comprehensive data collection, enhancing the accuracy and reliability of fingerprint recognition.
A key aspect of the Blusafe Breeze Smart Handle's design is its adaptability to different door handle directions. Before installation, users are guided through a process to check and, if necessary, change the handle's opening direction to match their door. This involves locating and removing a small location screw on the inside face of the handle, rotating the handle 180 degrees, and then replacing the screw. This flexibility ensures that the handle can be installed correctly on both left-handed and right-handed doors.
Installation of the Blusafe Breeze Smart Handle varies slightly depending on the model (A, B, or C) and the existing door setup. The manual provides detailed instructions for each model, covering steps such as removing existing handles and latches, installing the new latch (if required), feeding the hollow spindle and connection bosses through the door, and securing the internal and external handles. Some models may require drilling new holes in the door, for which a template is provided to ensure accurate alignment. The installation process emphasizes ensuring that the handles open in the correct direction and that all components are flush and securely fitted.
Maintenance features of the Blusafe Breeze Smart Handle primarily revolve around battery management and sensor care. The handle is powered by four AAA alkaline batteries, which are expected to last between 6 to 8 months, depending on usage and environmental conditions. The handle provides a low battery indication through a long triple beep when operated, signaling that the batteries are running low. Users are advised to change the batteries after the first few low battery warnings to avoid being locked out. The battery cassette is easily accessible by removing a magnetic handle cover on the internal handle, allowing for quick and straightforward battery replacement. When changing batteries, it is important to ensure the cable connector and setting button are correctly oriented and aligned.
For optimal performance of the fingerprint sensor, users are reminded to keep the sensor and their fingers clean, dry, and free from grease. This helps maintain the accuracy and responsiveness of the biometric recognition. The handle also includes a system lockdown feature as a security measure: five invalid fingerprint attempts within five minutes will cause the system to lock down for 90 seconds, during which the handle will not respond to fingerprint input. This lockdown can be cleared by pressing the set button and providing ADMIN validation, or by using the mechanical key.
The Blusafe Breeze Smart Handle is designed for durability and consistent performance. The internal electronics are protected, though users are cautioned against exposing the product to heavy rain, saltwater, or direct sunshine, which could potentially damage the components. The handle's ability to retain stored fingerprints even when batteries run low or are changed is a significant convenience feature, eliminating the need to re-register fingerprints after power interruptions. The system also includes an automatic logout feature during fingerprint addition if no operation is detected within 12 seconds, preventing unintended changes to the fingerprint database.
In summary, the Blusafe Breeze Smart Handle offers a sophisticated yet user-friendly approach to door security. Its core function of fingerprint access is complemented by robust backup systems, flexible installation options, and clear maintenance guidelines, making it a practical and secure choice for modern living.
General| Connectivity | Bluetooth |
|---|---|
| Power Source | Battery |
| Battery Life | Up to 12 months |
| Auto Lock | Yes |
| Remote Access | No |
| Voice Control | No |
| Compatibility | iOS, Android |
| Lock Type | Smart Lock |
| Battery Type | 4 AA Batteries |
To Next Page