BMS F-16C/D 4.34 - Page 99

T.O. BMS1F-16CM-1 BMS 4.34 Change 2.00
BMS 4.34 Dash 1
© Red Dog 2012-2019 Page: 99
OSB #19 & 20 are used to set the FCR range when the mode allows it. Depressing OSB#19
decreases range and OSB#20 increases range. Another way to set the range is by cursor bumping (if
the FCR is SOI) whenever the cursors hit the top or bottom edge of the FCR.