To Next PageTo Next PageWhat to do if instruments from BMT 964 are not free of hazardous substances?
If instruments are not free of hazardous substances, complete and sign the Hazardous Material Certification before sending them in for service or repair.
How to troubleshoot warnings or errors on BMT 964 Measuring Instruments?
To troubleshoot warnings or errors, use the software BMT 964 Link to locate possible sources of error.
General| Brand | BMT |
|---|---|
| Model | 964 |
| Category | Measuring Instruments |
| Language | English |
Discusses the impact of dirt on photometer performance and maintenance.
Details the isolated voltage and current output signals for concentration measurement.
Explains the function of the binary input for triggering the zero function.
Lists available binary output relay contacts for signaling errors and alarms.
Describes the SPST relay contact for signaling instrument errors.
Covers the bidirectional serial interface for PC communication.
Describes how to modify instrument settings via the front panel.
Explains the process of zeroing the instrument using the front panel controls.
Details how to view the instrument's configuration parameters.
Explains how to change instrument parameters using the front panel menu.
Explains the simpler serial interface mode for data output.
Describes the more complex mode for interactive parameter access.
Details automatic zeroing using purge gas control.
Describes a warning indicating the UV lamp is weakening.
Explains the error when the UV lamp is not functioning.
Notes when the cuvette is becoming dirty, affecting accuracy.
Describes the error when ozone concentration exceeds the instrument's range.
Details requirements for returning instruments for service.
Provides a checklist for shipping instruments for service or repair.
Introduces the portable version of the BMT 964.
Explains how to operate the BT model.
Describes the cabinet version housed in a splash-proof aluminum cabinet.
Provides an overview of the ozone analyzing system for moist off-gases.
Details the components and features of the Off-Gas Cabinet.
Describes the specifications and operation of the sample gas pump.
Details the electric cooler/dryer unit used in the system.
Introduces the UV photometer for measuring ozone in de-ionised water.
Describes the remote display unit for the BMT 964 series.
Explains how to operate the sensor with the remote display.
Details the physical connection requirements for MODBUS RTU.
Explains how to configure MODBUS communication parameters.
Describes the MODBUS communication protocol and message structure.
