To Next PageTo Next Page
Need help?Do you have a question about the BMT 965 and is the answer not in the manual?
General| Brand | BMT |
|---|---|
| Model | 965 |
| Category | Measuring Instruments |
| Language | English |
Details voltage (0-10V) and current (4-20mA) signal types and their characteristics.
Explains the function of the binary input for triggering the ZERO function with external voltage.
Describes relay contacts for alarms (Lamp Low, High/Low Alarm, Cuvette Dirty) and purge control.
Details the SPST relay contact for signaling instrument failures and error states.
Covers bidirectional communication via RS-232, pinout, and data format (8N1).
Explains USB OTG functionality for device/host modes, connecting flash drives, and firmware updates.
Details automatic zeroing cycles using purge gas control and relay contacts for solenoid valves.
Explains how to navigate menus and modify instrument settings via the front panel buttons.
Describes the procedure to initiate zeroing directly from the instrument's front panel interface.
Covers viewing instrument configuration and settings without the ability to change them.
Explains the simpler data output and input mode for serial communication.
Details connecting the instrument to a PC via USB for data access and file management.
Explains how to use USB flash drives for data transfer and firmware upgrades.
Outlines the process for updating the instrument's firmware using a USB flash drive.
Covers warnings and errors related to the UV lamp's performance (Low, Off, High).
Details warnings and errors due to cuvette dirtiness affecting measurement accuracy.
Explains errors related to overpressure, low pressure, and readings exceeding the measurement range.
Covers errors related to internal memory (EEPROM) and log storage (SD Card).
