BMT 965 - Units; Ozone

OZONE ANALYZER BMT 965 Manual, Rev. 01/2024
___________________________________________________________________________
22
M965_001_EN_2023
-
11
-
01
One more example: the numerical parameter High Alarm - Threshold (determines the threshold,
above which a High Alarm occurs) shall be changed from 75 g/Nm
3
to 90 g/Nm
3
.
Button Display
0.00 g/Nm
3
SCROLL
1.013 bar
SCROLL
View Parameters
SCROLL (> 2s)
Set Parameters
ENTER
Set Units
SCROLL
Set Alarms
ENTER
Set High Alarm
ENTER
Enable/Disable
SCROLL
Set Hi-Threshold
ENTER
Hi:075.0 g/Nm
3
ENTER
Hi:075.0 g/Nm
3
SET
Hi:085.0 g/Nm
3
SET
Hi:095.0 g/Nm
3
ENTER
Hi:095.0 g/Nm
3
SET
Hi:096.0 g/Nm
3
SET
Hi:097.0 g/Nm
3
SET
Hi:098.0 g/Nm
3
SET
Hi:099.0 g/Nm
3
SET
Hi:090.0 g/Nm
3
ENTER
Hi:090.0 g/Nm
3
ENTER
Saving...
Hi:090.0 g/Nm3
BACK
Set Hi-Threshold
BACK
Set High Alarm
BACK
Set Alarms
BACK
Set Parameters
BACK
0.00 g/Nm
3
On the following pages you can find a detailed description of all configurable parameters. Change
of one parameter may lead to the automatic change of other parameters. The stored parameter
information is not lost when the instrument is switched off.
Units
Ozone
This will set the unit of ozone concentration. You can choose between:
 g/Nm
3
 % wt/wt (carrier gas oxygen)
 ppm
v
 g/m
3
(AQ)
 ppm
w
(AQ)