OZONE ANALYZER BMT 965 Manual, Rev. 01/2024
___________________________________________________________________________
65
Appendix F: Remote Display BMT 965 RD
General Description
The different models of the OZONE-IN-WATER SENSOR BMT 965 AQ are available with the
display and control panel separated from the analyser, which then is a Sensor with a REMOTE
DISPLAY. Both elements are connected with a special cable, 2 or 5 m long, max. cable length is
100 m.
Dimensions of the REMOTE DISPLAY BMT 965 RD are 144 x 72 x 60 mm.
The connecting cable has a special pin-out on a 12-pole connector, and must be ordered with the
desired length. Models available as a sensor with REMOTE DISPLAY are: BMT 965 AQ/RD,
BMT 965 AQ/HF/RD, BMT 965 AQ-LC/RD. The analyser must be ordered as /RD version in
order to operate together with the REMOTE DISPLAY.
The REMOTE DISPLAY BMT 964 RD is fully compatible with the BMT 965 series of analysers.
In addition, the REMOTE DISPLAY BMT 965 RD may be used on the BMT 964 series of ana-
lysers.
Operation
The Sensor with REMOTE DISPLAY is operated the same way as the standard BMT 965 instru-
ment (see main part of the manual), if it is connected. Connecting the Remote Display during
operation of the sensor should be avoided.
To Next Page
Loading...