Steering wheel
Safety information
Warning
Steering wheel adjustments while driving can
lead to unexpected steering wheel movements.
Vehicle control could be lost. There is a risk of
accident. Adjustng the steering wheel while the
vehicle is stationary only.
Electric steering wheel
adjustment
General information
The steering wheel setting is stored for the driver
profile currently in use. When a driver profile is
selected, the position is accessed automatically
when the drive-ready state is switched on.
The current steering wheel position can be
stored using the memory function.
To make it easier to enter and exit the vehicle,
the steering wheel moves temporarily into the
upper position.
Adjusting
Press the switch to adjust the forward/back posi‐
tion and height of the steering wheel to the seat
position.
Heated steering wheel
Overview
Button for heated steering wheel
Switching on/off
Press the button.
A Check Control message is displayed.
If the trip is resumed within approx. 15 minutes
after an intermediate stop, the heated steering
wheel switches on automatically if the function
was switched on at the end of the last trip.
Memory function
Concept
The following settings can be stored and, if nec‐
essary, retrieved using the memory function:
▷ Seat position.
▷ Exterior mirror position.
▷ Steering wheel position.
▷ Height of the Head-up Display.
General information
Two memory locations with different settings
can be set for each driver profile.
The following settings are not stored:
▷ Backrest width.
▷ Lumbar support.
Seite 124
CONTROLS
Seats, mirrors and steering wheel
124
Online Edition for Part no. 01405A2C7F8 - II/21
To Next Page
Loading...
