After the successful completion of the upgrade,
booked services, for example RTTI, will be reacti‐
vated automatically while driving.
Functional requirements
▷ The battery is sufficiently charged.
▷ The outside temperature is above
14 ℉/-10 ℃.
▷ Vehicle is parked in a horizontal position.
▷ Hazard warning system is switched off.
▷ Selector lever position P is engaged.
▷ Engine is sufficiently cooled down.
▷ Automatic engine start for stationary climate
control is not activated via iDrive.
Preparing the vehicle
▷ Park the vehicle safely away from the public
road.
▷ Cellular network reception must be ensured
so that an error message can be sent, for in‐
stance if the installation is terminated.
▷ Close the windows.
▷ Close the glass sunroof.
▷ Close the trunk lid.
▷ Remove energy consuming devices, such as
a mobile phone.
▷ The vehicle key is in the vehicle at the start of
the installation.
▷ Switch off the exterior lighting.
Additional vehicle related functional require‐
ments are shown on the Control Display.
Install the upgrade later
The installation of the upgrade can be carried out
at a later time.
1.
"CAR"
2. "Settings"
3. "General settings"
4. "Remote Software Upgrade"
5. "Start upgrade now"
Follow the instructions on the Control Dis‐
play.
Functional limitations
During the upgrade, the majority of functions is
temporarily unavailable, for instance:
▷ Hazard warning system.
▷ Central locking system.
▷ Parking lights.
▷ Horn.
▷ Alarm system.
▷ Emergency call.
▷ Power windows.
▷ Glass sunroof.
▷ Checking the fuel filler flap lock.
The driver's door can be locked and unlocked
from the outside using the integrated key.
Malfunction
In the event of a malfunction, follow the instruc‐
tions on the Control Display or in the BMW Con‐
nected app.
If the malfunction cannot be remedied, contact a
dealer’s service center or another qualified serv‐
ice center or repair shop.
Seite 61
BMW Remote Software Upgrade
CONTROLS
61
Online Edition for Part no. 01405A2C7F8 - II/21
To Next Page