Functional requirement
The use of the Remote Software Upgrade re‐
quires an active ConnectedDrive contract.
Information about the version
General information
The information about the version contains a de‐
scription of the updates that are included in the
Remote Software Upgrade. During the download
and after the installation has been completed
successfully, the information about the version
can be displayed on the Control Display. The in‐
formation is available in the ConnectedDrive cus‐
tomer portal at any time.
Displaying information about the
version
1.
"CAR"
2. "Settings"
3. "General settings"
4. "Remote Software Upgrade"
5. "Installed version:"
Logging on to the ConnectedDrive customer
portal on the Internet under:
www.bmw-connecteddrive.com.
Search for and download of an
upgrade
General information
There are various options to search for and
download an upgrade:
▷ Automatic.
▷ Via iDrive.
▷ Via BMW Connected app.
Automatic download
The available data for Remote Software Upgrade
is automatically loaded into the vehicle. The
download does not require an approval.
Via iDrive
1. "CAR"
2. "Settings"
3. "General settings"
4. "Remote Software Upgrade"
5. "Search for upgrades"
6. Follow the instructions on the Control Dis‐
play.
Via BMW Connected app
1. Download the available upgrade to the smart‐
phone in the BMW Connected app.
2. Follow the instructions in the BMW Con‐
nected app.
3. Establish connection to the vehicle.
▷ iOS: Bluetooth Audio and WLAN.
▷ Android: WLAN in the vehicle.
The data transfer of the upgrade from the
smartphone to the vehicle occurs only while
driving.
4. Follow the instructions on the Control Dis‐
play.
Additional information:
Connecting mobile devices to the vehicle, refer
to page 72.
Install the upgrade immediately
General information
After successful download completion, installa‐
tion is offered once the vehicle is parked. The in‐
stallation can be carried out immediately follow‐
ing the download.
If the functional requirements are not met, for in‐
stance insufficient state of charge of th battery,
the installation cannot be completed. Pay atten‐
tion to an offer for installation, for instance after
extended driving.
Follow the instructions on the Control Display.
Seite 60
CONTROLS
BMW Remote Software Upgrade
60
Online Edition for Part no. 01405A2C7F8 - II/21
To Next Page
Loading...
