Manual air distribution
Concept
The air distribution for climate control can be ad‐
justed manually.
Adjusting the air distribution
manually
Press the button repeatedly. Select the
desired setting:
▷ Windows, upper body region, and floor area.
▷ Upper body region and floor area.
▷ Floor area.
▷ Windows and floor area.
▷ Windows: driver's side only.
▷ Windows and upper body region.
▷ Upper body region.
The selected air distribution is shown on the cli‐
mate control display.
SYNC program
Concept
The Sync program can be used to apply the set‐
tings on the driver's side to the passenger's side
and the rear.
Switching the SYNC program on/off
Press the button.
The LED of the button is illuminated
when the SYNC program is switched on.
Depending on the equipment, the following set‐
tings of the driver's side can be transferred to the
front-passenger side and the rear:
▷ Temperature.
▷ Air flow.
▷ Air distribution.
▷ AUTO program.
The program is switched off automatically if the
settings on the front passenger side or in the
rear are changed.
Defrost function
Concept
Ice and condensation are quickly removed from
the windshield and the front side windows.
Switching the Defrost function
on/off
Press the button.
The LED of the button is illuminated
when the system is switched on.
The air flow can be adjusted manually with the
system switched on.
If there is any window condensation, switch on
the air conditioning. Make sure that air can flow
to the windshield.
Rear window defroster
Concept
Ice and condensation are removed from the rear
window quickly.
Functional requirement
The function is operational when the drive-ready
state is switched on.
Switching rear window defroster
on/off
Press the button. The LED is illumi‐
nated with rear window defroster
switched on.
The rear window defroster switches off automat‐
ically after a certain period of time.
Seite 273
Climate control
CONTROLS
273
Online Edition for Part no. 01405A2C7F8 - II/21
To Next Page