2
36
Maintenance and care
Parking light
e
Important:
Always switch off the ignition
before changing bulbs.
L
Note:
Do not touch the glass of new
bulbs with the fingers. Use a
clean, dry cloth to hold the
bulbs when inserting them.
• Place the BMW C1 on its
stand
– after making sure that the
ground is level and firm
• Remove front fairing panel
• Open quick-release
fastener 2 by turning it coun-
ter-clockwise and swing the
headlight forward
• Pull bulb holder 3 out of the
headlight housing
• Remove bulb 1 from its
socket
• Installation is the reverse of
the removal procedure
– Parking light: 12 V 5 W
Changing bulbs
1
2
3
gg,
To Next Page
