2
41
Maintenance and care
• Remove bulb 5
•Pull cable4 with connector
from housing 3
• Installation is the reverse of
the removal procedure
L Note:
Align recesses 6 in the base of
the bulb with the guides in the
bulb socket.
Make sure that the holes in rub-
ber cap 2 are at the bottom
– Low-beam headlight 5:
H3 12 V 55 W
4
5
3
Changing bulbs
6
6
20K14bkg3.book Seite 41 Mittwoch, 19. Mai 2004 11:57 11
To Next Page
Loading...
