Copyright © by BOA Warenhandels-GmbH ● Germany
Rev 0, Stand: 01 / 2007
42
[10+]
When the number of a track is higher than 9, push [10+], then push the relevant number. This is used to enter
the decade of the number.
Each time it will be pressed, the decade will increase by 1.
[CLEAR]
When entering the programmed no., press [CLEAR] to cancel the entered number.
[SETUP]
When you push [SETUP], the screen will display the system setting picture. The user can select some relative
constant parameters. They can be set as needed. Detailed operation procedures can be found on page 14 and
following.
[ ]
While playing DVD, push the button once and the player will go into the pause-mode. Push twice to stop playing
completely. The function works depending on the used type of disk.
[DISPLAY]
Push the button to display some data of time, e.g. the current playing time, remaining time, etc.
[│◄◄]
While playing a DVD disk, push this button to skip to previous chapter; while playing SVCD and other disks,
push this button to skip to previous track.
[ENTER]
Push this button to execute the entered or the selected item.
[AUDIO]
Push this key to select the language of the sound on the disk. Push it once to change to another language (this
operation works only for the disks with multi-language audio).
[SRC] or [DVD.GAME]
If you will push the [SRC] button, the unit will turn to display the auxiliary input. You can watch another program
or play a game with the connected game console. Push [SRC] again and you will return to the DVD.
E
N
G
L
I
S
H
To Next Page
Loading...