Boca SoundExpression SE1440 - Appendix D: Wave Table Card Installation

56
SoundExpression
○ ○
○ ○
○ ○
PANASONIC
IDE
MITSUMI
SONY
ENABLE
DISABLE
COM 2=
COM 4=
COM 1=
COM 3=
{
{
C
O
M
I
R
Q
7
5
4
3
The SE1440 will support a Wave Blaster
tm
compatible wave table card (not
supplied by Boca Research). The Wave Table card contains sound samples
of actual instruments. When MIDI music is played using the wave table
card, the music will sound like real instruments.
To set up the Wave Table Card:
1. Start Windows as you normally would.
2. Select the Midimapper icon in the Windows Control Panel.
3. Select MPU-401 in the Midimapper dialog box.
26-pin connector;
attach to wave
table connector on
the SE1440
NOTE: Wave Table
cards vary in type
and size and may
not resemble the
one pictured here.
Appendix D: Wave Table Card Installation