73
Command Description
View Configuration
AT&V View current configuration and user profile.
Store user profile. Saves the current configuration into non-volatile RAM as one of
two user profiles.
AT&W0 Saves as user profile 0.
AT&W1 Saves as user profile 1.
Designate default user profile
AT&Y0 Selects user profile 0.
AT&Y1 Selects user profile 1.
Stored phone number (where n equals a 45-digit dial string)
AT&Z0=n
AT&Z1=n
AT&Z2=n
AT&Z3=n
Generate Data Modem Calling Tone. This command allows the DTE to select
whether the modem will send a 1300 Hz calling tone when originating a data modem
connection.
AT-C0 Disabled. (DEFAULT)
AT-C1 Enabled.
Modem Command Reference
To Next Page
Loading...