8
SoundExpression
How This Manual is Organized.
Section One: Introduction. An overview of the features of the SE1440,
along with system requirements.
Section Two: Installing Your New SE1440. This section provides detailed
hardware installation instructions, including diagrams of the SE1440’s
connectors and jumper blocks and explanations of how to make all
connections to other devices.
Section Three: Driver Installation. Explains how to run the COMCHECK
utility and install the drivers for Windows and DOS.
Section Four: Modem Functions and Features. Describes modem features
and provides procedures for testing the modem’s connection.
Section Five: Troubleshooting. Provides solutions to common problems
for both sound and modem functions.
Appendices. These include technical specifications, configuration settings,
microphone and speaker requirements, as well as instructions for
installing a wave table card. Notes on the MIDI interface, digital sound,
and Windows Sound System are also included. A modem AT command
reference, modem and audio glossaries, FCC and DOC (Canada)
compliance information, and servicing and warranty policies complete
this section.
To Next Page
Loading...