80
SoundExpression
Register Range Units Default Definition
S12 0-255 1/50 sec. 50(1) Escape code guard time.
S13 Reserved.
S14 Bit Mapped NA NA Bit mapped registers.
S15 Reserved
S16 Bit Mapped NA NA Modem test options.
S17 Reserved.
S18 0-255 seconds 0 Test timer.
S19 Reserved.
S20 Reserved.
S21 Bit Mapped NA NA Bit mapped registers.
S22 Bit Mapped NA NA Bit mapped registers.
S23 Bit Mapped NA NA Bit mapped registers.
S24 Reserved.
S25 0-255 seconds 5 Asynchronous DTR Delay.
S26 0-255 seconds 1 RTS to CTS Delay Interval.
S27 Bit Mapped Bit mapped registers.
S28 Reserved.
S29 Reserved.
S30 0-255 seconds 10 Sleep Mode Timer.
S37 0-12 0 Maximum Speed Attempted
S90 0-255 minutes 0 Disconnect Inactivity Timer.
S108 0-3 Retrain Signal Quality Selector
0=no retrain
1=low-quality retrain after many errors
2=medium-quality retrain after some errors
3=high-quality retrain after few errors
NOTE: Default is 1 when V.32 and 2 when V.32bis.
S109 Bit-mapped 62 Line Speeds Permitted
Bit 0 reserved
Bit 1 4800
Bit 2 7200
Bit 3 9600
Bit 4 12000
Bit 5 14400
Bits 6-7 reserved
Default: V.32 S109=10 (bits 2, 4, 5 not supported)
V.32bis S109=62
To Next Page
Loading...