Bodet KELIO PRIO V2 User Manual

3. GENERAL OVERVIEW
K
ELIO PRIO V2 is a time-management terminal for people and activities.
This terminal operates:
- clocking downloads via the Ethernet network, under constant connection with the master
terminal (K
ELIO VISIO, VISIO HUB OR VIRTUAL HUB),
- downloading of badge clock-ins in offline mode, downloading badge clock-ins using USB
flash drive
1
. The KELIO PRIO V2 application program as well as the firmware of the biometric
module are updated using a USB flash drive.
The USB flash drive is not supplied with the terminal. It is possible that some flash drives on
the market may not be compatible with the terminal. Check that the terminal is operational
using other USB flash drives, if the USB flash drive does not work.
The following USB flash drives have been tested on the product (this list is not exhaustive)
- D
ANE-ELEC CAP LESS 2 Gb
- D
ANE-ELEC CUBE MEMORY 512 Mb
- D
ANE-ELEC ZMATE PEN NACRE 1 Gb
- D
ANE-ELEC ZMATE PEN ZLIGHT 2 Gb
- K
INGSTON DATATRAVELER 512 Mb
- I
NTEGRAL 128 Mb
1
This mode is not compatible with KELIO PRIO V2 Mifare versions.
USB flash drive or
barcode reader
Ethernet network
Fingerprint

Bodet KELIO PRIO V2 Specifications

General

Brand	Bodet
Model	KELIO PRIO V2
Category	Touch terminals
Language	English