Bodet KELIO PRIO V2 User Manual

4. INSTALLATION
4.1 Mechanical installation
- The terminal is designed for indoor installation only.
- Select premises with low temperature variations and far from any electromagnetic
interference sources (contactors, motors, other badge swipe readers, etc.).
- Partially unfasten the lower screw [A] from the terminal and take the holding plate off the
terminal.
- Fix the holding plate on the wall using the 3 screws and rawlplugs.
115
mm
80
mm
15
mm
[A]

Bodet KELIO PRIO V2 Specifications

General

Brand	Bodet
Model	KELIO PRIO V2
Category	Touch terminals
Language	English