Bodyguard T320X - User Manual

Questions and Answers

P
pconleyAug 10, 2025
Why does the belt on my Bodyguard T320X not turn?
- M
  mcfarlandjasonAug 10, 2025
  If the belt on your Bodyguard Treadmill isn't turning, make sure that you insert the magnetic key. Also, it may be necessary to perform a Belt Alignment.
L
lopezevelynAug 15, 2025
What to do if my Bodyguard T320X Treadmill belt tracks left and right?
- T
  Thomas ChenAug 15, 2025
  If the belt on your Bodyguard Treadmill is moving from side to side, first, move the treadmill to an even floor. If the issue persists, the rear roller may need adjustment, so perform a Belt Alignment.
S
Steven GrahamAug 20, 2025
What to do if computer will not light up on Bodyguard Treadmill?
- M
  Mr. Timothy York IIIAug 20, 2025
  If the computer on your Bodyguard Treadmill doesn't light up, there are several things you can check: * Ensure the unit is properly plugged in. * Verify the power cord is functional, and replace it if needed. * Try resetting the breaker. * Remove the cover and connect the wires properly.
C
Cody FordAug 26, 2025
What to do if the speed is not constant on Bodyguard Treadmill?
- V
  vmorrisonAug 26, 2025
  If the speed on your Bodyguard Treadmill is inconsistent, or seems too fast or slow, perform a Motor Check. Also, remove tension on the running belt and perform Belt Alignment.
M
Mrs. Karina BridgesAug 30, 2025
How to fix elevation issues on Bodyguard T320X?
- L
  Lisa NelsonAug 30, 2025
  To resolve elevation issues on your Bodyguard Treadmill, start by performing an Elevation Calibration. Also, check that the elevation wire is securely connected to the motor drive.
K
Kathryn CookSep 4, 2025
What to do if motor drive does not respond properly on Bodyguard T320X?
- D
  Daniel CastanedaSep 4, 2025
  If the motor drive on your Bodyguard Treadmill isn't responding correctly, perform a Motor Check. Also, ensure the motor wiring harness is connected to the motor drive.