General 1.2 Introduction
Page 8 BOGE Operating instructions for C 10 L...C 20 L series screw compressors
Transport damage
BOGE does not accept any liability for breakage or transport damage. Please
inspect the compressor immediately after delivery and direct damage claims
to the last haulier – even when the packing is not damaged!
To safeguard claims against the haulier we recommend leaving the machine,
devi
ces and packing material in the same condition as they were in when the
damage was detected.
In the event of any other complaints, please infor
m us within six days after ar-
rival of the delivery.
Data on the type plate
Enter the data of your compressor from the type plate or enclosed data sheet
in the illustration below. This will ensure that in the event of enquiries, you will
always have the most important data to hand.
Fig. 1.1: Data on the type plate
Service
Please do not hesitate to contact BOGE service if you have any questions.
Please call:
Telephone: +1-770-874-1570
Telephone: +49 5206 601-140
In the event of inquiries, always specify the
following data of your compressor
to prevent any delays:
–Type
– Year of manufacture
– Machine number
Attention!
Only BOGE service technicians or persons authorized by BOGE in writing
may repa
ir or alter the compressor during the warranty period. Otherwise all
warranty claims will expire!
To Next Page
Loading...
Need help?
General
