Boge C 15 - 7.1 Flow Chart

76 pages

Save Page as PDF

To Next Page

To Next Page

To Previous Page

To Previous Page

Loading...

BOGE Operating instructions for C 15 series screw compressors Page 63

Appendix 7.1 Flow chart

Part 7: Appendix 7.1 Flow chart

On the following pages you will find the individual flow charts for your compres-

sor and components.

Table of Contents

Default Chapter1
- Operating Instructions1
- Table of Contents5
- Part 1: 1.1 General Safety Instructions9
1.1 General Safety Instructions10
- Special Hazard Warnings10
- Electrical Energy Hazards11
- Personnel Requirements12
- Accident Prevention Regulations13
- First Aid14
1.2 Introduction15
- Symbols Used15
- Symbols on the Compressor16
- Intended Use21
- Transport Damage22
- Part 2: 2.1 Technical Data – Compressor23
2.1 Technical Data - Compressor24
Function Description Compressor24
- Air Circuit25
- Oil Circuit26
Compressor Control27
- Control of Compressors with Frequency Control (C 15 F)28
2.4 Safety and Monitoring Devices29
- Safety Valve29
- Part 3: 3.1 Transport and Storage31
3.1 Transport and Storage32
- Intermediate Storage32
Compressor Room33
- Sound Protection34
- Cooling Air Requirement35
- Ventilation Possibilities36
Installation37
- Connecting the Compressor to the Compressed Air Network38
- Activating the Belt Tensioning Device39
- Checking the Oil Level40
Part 337
3.4 Electrical Connection42
Commissioning42
- Checking Compressed Air Outlet for Tightness43
- Checking for Leaks44
Dismantling45
- Part 4: 4.1 BOGE-Duotherm BPT47
Part 648
Maintenance48
- Part 5: 5.1 General49
- Part 6: 6.1 Safety Instructions51
6.1 Safety Instructions53
General53
- Maintenance Intervals54
- General Information Concerning the Lubricants Used56
- Disposal of Used Operating Material57
Maintenance Work Compressor58
- Changing the Supply Air Filter Mats59
- Drive Motors with Permanent Lubrication60
- Setting of the GM-Drive System C 15 / C 15 F61
- Checking the Oil Level, Topping up Oil62
- Changing the Oil Filter (Fig. 6.6)63
- Changing Oil Separators (Fig. 6.6)64
- Oil Change65
- Flushing the Oil Circuit67
- Cleaning the Compressed Air/Oil Cooling Unit68
- Nozzle with Dirt Catch69
Spare Parts and Optional Equipment70
- Part 7: 7.1 Flow Chart71
Appendix Air Cooled Version, Standard, C 15 / C 15 F72
7.1 Flow Chart74
- BOGE-Duotherm BPT Plate Heat Exchanger74
List of Maintenance and Service Work75

Related product manuals

Preview: Boge C 10 L

Preview: Boge S 40-3