BOGE Operating instructions for C 15 series screw compressors Page 43
Maintenance 6.1 Safety instructions
Part 6: Maintenance 6.1 Safety instructions
WARNING!
Ensure that maintenance work is ony carried out by specialists or appropri-
ately trained persons.
Any performance of work on pressurized system components may be carried
out by duly qualified and specialized personnel only.
– Prior to starting any maintenance work, always stop the compressor as
described in these operating instructions prior to removing any cladding
or safety devices. Refit the cladding or safety devices immediately upon
completion of the maintenance work.
– Heavy components may only be lifted up by various persons in due con-
sideration of the local industrial safety regulations.
– Only use original spare parts, compressor oils and operating materials
released by BOGE for the maintenance work.
– With an activated automatic restart (Auto-Restart) the compressor may
restart automatically after a voltage failure.
Prerequisite: The net pressure is lower than the set switch-on pressure.
To Next Page
Loading...
Need help?
General
