Maintenance 6.2 The BOGE maintenance concept
Page 54 Operating instructions for S 40-3...S 150-3 series screw compressors
List of maintenance and
service work
S 40-3...S 150-3
Fig. 6.1: Maintenance work S 40-3...S 150-3
1 Check pressure / final compressor temperature / system relief /
emergency stop button
2 Check / change (if necessary) supply air filter
3 Check suction filter
– Clean filter and cartridge
– Change filter cartridge
4 – Check oil level
– Top up oil
5 Clean compressed air/oil cooler externally
6 Change oil filter
7 Change oil separator
8 Check / change V-belt
9 After extended stoppages: Fill the suction controller with oil:
10 Oil change
11 (Lubricate motor bearings)