Bomag BPH 80/65 - Noise and Vibration Data

Technical Data
BOMAG 10 BPH 80/65
The following noise and vibration data acc. to
- EC Machine Regulation edition 98/37/EC and
- the noise regulation 2000/14/EC, noise protection guideline 2003/10/EC
- Vibration Protection Regulation 2002/44/EC
were determined during conditions typical for this type of equipment and by application of harmo-
nized standards.
During operation these values may vary because of the existing operating conditions.
Noise value
sound pressure level on the operator’s stand:
L
pA
= 91.8 dB(A), determined acc. to ISO 11204 and EN 500
Garanteed sound capacity level:
L
WA
= 109 dB(A), determined acc. to ISO 3744 and EN 500
!
Danger
Loss of hearing!
Wear your personal noise protection means (ear defenders) before starting operation.
Vibration value
Hand-arm vibration:
Vector total of the weighted effective acceleration in three orthogonal directions:
Weighted total vibration value
a
hw
=7.0m/sec
2
on crushed rock determined acc. to ISO 5349 and EN 500
!
Caution
Observe the daily vibration load (Industrial safety acc. to 2002/44/EC).