Maintenance
BOMAG
34
BPH 80/65
4.4 Running-in instructions
For the start-up of new machines of over-
hauled engines the following maintenance
work must be performed:
!
Caution
Duringtherunning-inperioduptoapprox.200
operating hours check the engine oil level two
times every day.
Depending on the engine load the oil con-
sumption will drop to its normal level after a
running time of approx. 100 to 200 operating
hours.
After 25 operating hours
l Change the engine oil.
l Check engine and machine for leaks.
l Check the valve clearance, adjust if neces-
sary.
l Check the oil level in the vibrator shaft hous-
ing.
l Check the hydraulic oil level.
l Retighten the fastening screws for air filter, ex-
haust silencer, fuel tank and other attach-
ments.
l Tighten the screw connections on the ma-
chine.
To Next Page
Loading...
