Bomag BPH 80/65 - Engine Starting Procedures

Operation
BOMAG 20 BPH 80/65
3.5 Starting the engine
! Danger
Danger of explosion!
Never use any starting aid sprays or other in-
flammable fluids to assist starting.
!
Danger
Danger of injury!
Before starting make sure that no persons are
inside the danger zone of engine or machine
and that all guards and safety installations are
properly fastened.
For starting remove your feet from the danger
area of the base plate.
The vibration must always be switched off be-
fore starting the engine.
Fig. 7
l Press the push button vibration "ON/OFF"
(Fig. 7) .
The vibration is now switched for starting the
engine.
Fig. 8
l Set the throttle lever (Fig. 8) to position "MIN."
(idle speed).
Fig. 9
l Turn the ignition key to position "I" (Fig. 9) , the
warning buzzer sounds.
l Then turn the ignition key further to position
"II", the engine starts.
l As soon as the engine has started turn the ig-
nition key back to position "I".
The warning buzzer stops.