Trouble shooting
BOMAG
54
BPH 80/65
5.1 General notes
The following work must only be carried out by
qualified and trained personnel or by the
BOMAG sales service.
Please observe strictly the safety regulations
in chapter 2 of these operating and mainte-
nance instructions.
Faults occur frequently due to the fact, that the
machine has not been properly operated or serv-
iced. Therefore, whenever a fault occurs, read
through these instructions on correct operation
and maintenance. If you cannot locate the cause
of the fault or eliminate it yourself by following the
trouble shooting charts, you should contact our
customer service departments at our branch office
or dealers.
On the following pages you will find a selection of
fault remedies. It is quite obvious that we were not
able to list all possible causes for faults.
To Next Page
Loading...
