Operation
BOMAG
18
BPH 80/65
3.1 General notes
Please read section 3 Indicators and Control Ele-
ments thoroughly before operating the machine if
you are not yet fully familiar with the indicators and
control elements of the machine.
All indicators and control elements are described
in detail in this chapter.
3.2 Before starting work
Please observe strictly the safety regulations
in chapter 2 of these operating and mainte-
nance instructions.
Refer also to the detailed description in the
chapter "Maintenance".
Top up missing lubricants in compliance with the
maintenance instructions.
l Stand the machine on ground as level as pos-
sible.
l Check fuel tank and lines for leakages.
l Check the engine oil level, if necessary top up
to the top level mark.
l Check the hydraulic oil level, top up if neces-
sary.
l Check the fuel level, top up if necessary.
l Check the dry air filter service indicator.
l Check the condition of the whole machine and
the screw connections for tight fit.
!
Danger
Loss of hearing!
Always wear your personal noise protection
means (ear defenders) before starting opera-
tion.
To Next Page
Loading...
