Bomag BPH 80/65 - Page 46

Maintenance every 6 months
BOMAG 46 BPH 80/65
For quality and quantity of oil refer to the table
of fuels and lubricants.
l Turn in level inspection plug (2) with a new
seal ring.
Fig. 53
Turn in bleeding screw 1 (Fig. 53).
4.18 Changing the dry air filter
Fig. 54
l Remove the air filter cover (Fig. 54) .
Fig. 55
l Taking the air filter cartridge off (Fig. 55) .
!
Caution
No dirt or foreign particles must enter the
clean air side.
Do not blow the filter housing out with com-
pressed air.
l Clean the inside of the filter housing only with
a clean cloth.
l Clean the cover thoroughly.