Maintenance every 6 months
BOMAG
48
BPR 35/40 D BPR 35/60 D
Do not hold the water jet directly into the air fil-
ter, the exhaust and the electric system (if
present).
l Disconnect the battery
*
.
l Spray the entire cooling air area with cleaning
solution (e.g. cold cleansing agent), let it soak
in for a while and clean off with a sharp water
jet.
l Runtheenginewarmforashortwhiletoavoid
corrosion.
5.17 Cleaning the exhaust
screen
!
Danger
Danger of burning!
The exhaust is very hot during and after oper-
ation. Perform this work only after cooling
down.
Fig. 55
l Unscrew the fastening nut (Fig. 55), remove
the exhaust screen and the fastening bracket.
Fig. 56
l Clean deposits on the screen insert with a suit-
able wire brush (Fig. 56).
l Examine the exhaust screen for cracks or frac-
tures, replace if necessary.
*Option
Go to Discount-Equipment.com to order your parts
To Next Page
