Bomag BPR 55/65 D - Change the Oil in the Exciter Housing

Maintenance every year
BOMAG 55BPR 45/55 D, BPR 55/65 D
Fig. 63
l Loosen the hose clamps on the three fuel lines
and pul the fuel lines off the fuel filter (Fig. 63).
l Remove the bracket and take off the fuel filter.
Note
i
Mind the installation direction (arrow) when as-
sembling the fuel filter.
l Install the new fuel filter, push on the fuel lines
and fasten them with the hose clamps.
Fig. 64
l Open the fuel tap (Fig. 64), set the handle to
vertical position.
6.17 Change the oil in the exciter
housing
Caution
!
Park the machine on level ground.
For quality and quantity of oil refer to the ”ta-
ble of fuels and lubricants”.
Environment
Catch running out oil, do not let it seep into the
ground and dispose off environmentally.
l Clean the area around breather and drain
plug.
Fig. 65
l Unscrew ventilation (1) (Fig. 65) and level in-
spection plugs (2).
l Drain the oil through the inspection plug bore.
For this purpose tilt the machine to the side
with the oil drain opening and support it safely.
692081
OIL
1 2